CONTEC MS100 SpO2 Simulator Patient Oximeter Simulator

Brief Introduction
MS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests for the oximeter by simulation means, and gives cognizance of veracity about the oximeter.
Because the oximeter manufacturer may use different R-curves, some R-curves used abroad currently have been embedded.

Features
Separated connection between simulator probe and host, operation and test are more convenient.
262K color and 320*240 TFT, adjustable brightness level.
Film key-press, makes the operation more comfortable.
Power with chargeable lithium battery, can display the charge information of battery.
Key volume, can open or close.

Main Functions
Oxygen saturation simulation;
Pulse rate simulation;
Patient state simulation preset;
Can test the reaction time of device;
Can simulate the SpO2 and pulse rate under different amplitude;
Can test the performance of device under different interference source;
Can select different R-curve.

Main Parameters
SpO2
Measuring range: 35%~100%
Resolution:1%
Error: When SpO2 is 75%~100%, the error is the larger between ±2% and ±P(P denotes the precision of the tested oximeter); when SpO2 is 74%~50%, the error is the larger between ±2% and ±P; no define when SpO2 is less than 50%.

Pulse rate
Measuring range:25bpm~250bpm
Resolution:5bpm
Error:1%±1bpm

Amplitude
Measuring range:0.000%~20.000%
Resolution:1% for 1.000%~20.000%; 0.1% for 0.100%~0.900%; 0.025% for 0.000%~0.075%.
Patient state
24 conditions presetting and 8 conditions as default after start. The number of condition can be adjusted by Motion level setup.

Voltage
DC 3.6V~4.2V
Power Supply
Voltage 3.7 rechargeable lithium battery × 1
Battery working life
Charge and discharge no less than 500 times.

Accessaries
A MS100 user manual
A 5.0V adaptor

Certificate

ISO, CE, RoHs

Shenzhen Huge Creation Technolgoy Limited established in 2008, a professional manufacturer and supplier of high quality home used medical equipment and healthcare products in Shenzhen.

Our head office is located in Futian District, Shenzhen city, China. The production plant is located in Bao’an District of Shenzhen city too. Our company operates within the ISO9001:2000 quality control system with a strong research and development ability to ensure the product quality.

By now we are successful to get good feedback from oversea market on our following products series: Alkaline Water Ionizer, Alkaline Water Cup, Pulse Oximeter, Fetal Doppler, Blood pressure Monitor, Blood glucose meter, Thermometer, Compressor Nebulizer, and Electric Toothbrush. All our products comply with CE and ROHS standard. For the home use medical products, most of them comply with FDA certificate.

OEM service is our main business, meanwhile, we provide ODM service.

•We are a service oriented organization from which you can expect reliable and professional service. Our priority is your complete satisfaction.

•Our dedicated account managers take care of each order from start to finish. Every question is a good question, so please never hesitate to ask.

•We take your (and our) reputation seriously. We believe in building trust with all our clients.

•We are ready to collaborate with you in all aspects of your business in order to achieve your business goals.